Not all Dana axles have the model number cast on the housing. It can be very difficult to tell a Dana 60 from a Dana 70, as they have nearly identical covers with exactly the same bolt pattern. One way to tell if you have a Dana 60 or Dana 70 is...

Many Dana Axle have the model number cast somewhere on the cast iron differential housing.

All 1994-2002 Dana Rear Axles in Dodge Ram trucks have a Bill of Material Number (BOM) stamped on a Build Tag (red arrow) attached to the differential by two of the differential cover bolts (yellow arrows). The BOM number is a 6 digit number...

To identify your Chevy, Dodge, GMC, or Ram truck's New Venture NV4500 transmission assembly number, you need to locate one of the two factory data tags. For trucks that still have the original transmission, you can usually order parts based on the truck...

New Venture Gear (NVG) was a joint venture between Chrysler's New Process Gear (NPG) and GM's Hydromatic Muncie Transmission Division that was formed on February 6, 1990. The NV4500 5 speed manual transmission is primarily a New Process Gear design that...

TK52137 10 Bolt PTO Cover Gasket for New Process NP200, NP201, and NP202 Transfer Cases.

TK52136 Gasket, Rear Output Housing to Main Case for IHC TC141 New Process NP202 Transfer Case

Magna 271 and 273 cases built in Mexico also have a build Tag, but is usually unpainted and just stamped with the Transfer Case ID numbers, but no other identification.

For parts identification purposes, a Round Tag (shown at left; click on picture to enlarge image) is affixed to the back of the rear case. Stamped on the tag are the Model Number (NV271F), Assembly Number (10 to 11 character alpha-numeric number code),...

Anti-Lock Brakes 1994-1997: Optional.  External sensor attached to steering knuckle. Tone Ring is on outer axle shaft. Anti-Lock Brakes 1998-1999: Optional. ABS sensor is internal, reading off tone ring inside each front wheel hub...

Starting around 1965, Dana started using metal tags affixed to the differential cover by two of the cover bolts. Each tag has a Bill of Material Number (BOM) stamped on it and it is affixed to the axle before it is shipped from the factory. The photo...

QU40654 1.25" Long Split Dana 44 Hub Drive Gear Spacer is a split Steel Spacer that fits between your outer wheel bearing and hub drive gear on many 1980's Dodge and Jeep 4x4s with Dana 44 front axles with solid drive gears. Also available while supplies...