1350 SERIES TUBE YOKE FOR 3"X0.083" TUBING

TK40981 Premium 2.75" x 0.083" Wall Thickness DOM Driveshaft Tubing is stronger, straighter, and more concentric than regular weld driveshaft tubing.  The premium tubing is Drawn Over a precision machined Mandrel (DOM) for maximum manufacturing...

TK40980 Premium 2.5" x 0.083" DOM Driveshaft Tubing is stronger, straighter, and more concentric than regular weld driveshaft tubing. The premium tubing is Drawn Over a precision machined Mandrel (DOM) for maximum manufacturing accuracy. Sold by the Inch...

QU20666 NV271F, NV273F 43 Spline Input Shaft for 2011-2016 Ford Super Duty F250, F350, F450, F550 4x4 NV271F (6-speed auto transmissions) and NV273F Transfer Cases. Need More Info? Use the handy Links below to access over 40 years of Dan's product...

QU30214U Used Bare NP208C Tailshaft Housing for 1985-1988 Chevy and GMC GM New Process NP208C transfer cases with rear housing casting number 15162. Available while supplies last. Need More Info? Use the handy Links below to access over 40 years of...

TK40979 2" x 0.120" Premium Seamless Drawn Over Mandrel (DOM) Steel Driveshaft Tubing is used to replace damaged tubing or to lengthen any driveshaft made with 2" outside diameter x 0.120" wall thickness driveshaft tubing. Most commonly found on the...

Ford uses Dana Super 60 Front Driving Axles in 2005 and newer F250, F350, F450, and F550 Super Duty 4x4 trucks. Each axle is built with a Bill of Material (BOM) Tag affixed to the differential cover by two cover bolts. These axles  will also...

ID Your Dana Closed Knuckle Front Axle Ball Type. Dana-Spicer produced closed knuckle front drive axles from 1941-1979. These axles have a Ball welded to the outer end of each axle tube. The Ball is open at the outboard end and the top and bottom...

Dana 80 Rear Axles have been in production since the 1988 Model Year. They have been used in Chevy/GMC 1992-2002 , Dodge(1994-2002), and Ford (1988-current) trucks vans, and motorhome chassis. Dana 80 rear differential covers look very similar to Dana 60...

Spicer 1410 Series and AAM 1415 Series Driveshaft Universal Joints are nearly identical, but not directly interchangeable as the overall installed width of the two universal joint types are 0.010" different. A Spicer 1410 Series U-Joint installed in an...

QU11200U Used Front Brake Shield for 1981-1993 Dodge Dana 44 Axles. Fits either left or right side. Available while supplies last.

GM AC Delco 10-4033 88861800 Manual Transmission and Transfer Case Fluid 1 quart Bottle 88861800 meets GM specification GM 9986252. Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to...